KegLand DigiMash All-Grain Electric Brewing System with Gen 2 DigiBoil - 35L / 9.25 gal, 110V

The KegLand DigiMash pairs a 35-liter (9.25-gallon) DigiBoil electric kettle with a stainless steel mash kit, so one vessel handles your whole all-grain brew day on an ordinary 110V household outlet. Bring the strike water up to temperature, mash in the stainless malt pipe, raise the pipe to drain and sparge, then take it out and boil in the same kettle. This version comes with the Gen 2 DigiBoil: a glass lid replaces the stainless one so you can see the boil, and a plastic base replaces the rubber feet to steady the kettle and lift it a little higher off the floor.

Why brewers choose it

• Mash and boil happen in one kettle, so there is less gear to set up, clean and store.
• Plugs into a standard 110V/15A outlet with its 5 ft cord. No 240V circuit is needed.
• A 1000 W and a 500 W element (1500 W combined) switch on separately: run one to hold mash temperature gently, or both to reach a boil faster.
• The digital controller holds whatever temperature you set and displays °F or °C.
• The 304 stainless steel kettle hides its elements, so there are no exposed coils to scrub.
• The 1/2 in. stainless ball valve has a removable 13 mm barb, so you can fit 1/2 in. FPT quick disconnects or plumb in a pump for recirculation later.
• Stamped gallon and liter markings inside the kettle make it easy to hit your volumes.

Good to know

The DigiMash has no programmable mash steps, no delayed start and no built-in pump. You can still step mash by raising the set temperature by hand, and you can add the optional recirculation pump kit or your own external pump to recirculate the mash. Some product photos may still show the earlier stainless lid and rubber feet; the kettle you receive is the Gen 2 version.

Specifications

In the box

• DigiBoil 35L electric kettle, 110V, Gen 2 (glass lid)
• Stainless malt pipe
• Malt pipe handle
• False bottom
• Malt pipe bottom screen
• Wire support