- The most affordable all-in-one automated all-grain brewing system!
- Mash grains and boil wort in a single vessel
- DigiBoil electric kettle automatically maintains mash temperatures with the digital controller
- Dual heating elements combine for 2400W of power
- Also available with optional Recirculation Pump Kit!
The DigiMash system represents the best value in electric all-grain brewing you'll find. With a 9-gallon DigiBoil electric kettle and the DigiMash stainless steel mashing accessory pack included, this is by far the most affordable way to get into electric all-grain brewing. It may not have all the bells and whistles of the BrewZilla, but it does have everything you need to mash and boil all in one unit. Setting up and using the DigiMash couldn't be easier. Simply place the false bottom inside the kettle and install the malt pipe, fill with water and heat to your desired strike temperature, then add your grain and set your desired mash temperature on the digital controller. Once your mash is complete, lift up the malt pipe, drain the wort and sparge, then remove the malt pipe and proceed to boil.
If you're deciding between the DigiMash and the BrewZilla, there are a couple of key differences worth noting. One of our favorite features of the BrewZilla is the programmable mash steps and delayed start, which the DigiMash does not have. You can still step mash by simply raising the temperature manually on the controller, but the automatic steps are a convenient feature if you want to set it and forget it.
The other major difference between the two systems is that the BrewZilla features a built-in pump for recirculating the mash. Recirculation is a great way to improve mash efficiency, but it is far from required for a successful brew day. Using an external pump with the DigiMash is also an option, and one can be integrated for mash recirculation quite easily. Simply connect the ball valve to the inlet of your pump, and then connect the outlet of the pump to our Sparge Arm Assembly.
This model comes with the 35L DigiBoil, which has two built-in heating elements that run off a 220V plug. One element is 1900w and the other is 500w for a combined 2400 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage both elements to quickly go from mash temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s).
If you have access to 220V power, this is definitely the unit we recommend. Although 110V power is enough to get up to boil, 220V will get you there faster and provide a much more vigorous boil.
Integrated stainless ball valve comes with a 13mm barb (approx. 1/2"). The barb can be removed to attach fittings with 1/2" FPT, such as our female threaded quick disconnect.
DigiBoil Features:
- 304 stainless steel construction
- 9 gallon total capacity
- Digital temperature control
- 220V / 15A power
- NEMA 6-30R plug (5 ft. cord)
- Dual heating element control (1000w and 500w)
- Heating elements are concealed for easy cleaning
- 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2")
- Stamped-in volume markers (gallons & liters)
- Stainless lid
- Temperature reads in °F or °C
- With elements turned off, hold both +/- buttons to switch between °F or °C
- Recommended max. grain bill - 18 lbs
- Recommended min. grain bill - 8 lbs
- External Dimensions: 29" H x 15" W (including handles)
- Internal Dimensions: 19.5" H x 11.75" W
DigiMash Upgrade Includes:
- False bottom
- Malt pipe
- Wire support
- Malt pipe handle
- Malt pipe bottom screen
