null Skip to main content

DigiBoil Electric Kettle, Gen 2- 35L/ 9.25G (110V)

Kegland

$199.99
(No reviews yet) Write a Review
SKU:
BE515
Minimum Purchase:
1 unit
Maximum Purchase:
10 units
  • Neoprene Jacket for BrewZilla 3.1.1 & DigiBoil - 35L
  • Perfect for Brew in a Bag, this large 32 x 22 in bag will fit pots up to 21.5 in. The bag comes with a draw string to cinch down on the rim of your kettle. Made from polyester. Can also be used for whole hops in hoppy beer.
  • The hop spider is stainless steel mesh hop filter that hangs from the the edge of your kettle. Up to 12 oz of hops are poured directly into the spider during the boil.  Made from 304 stainless steel. The basket is 13.75 in (35cm) high with the opening at the top being 5.9 in (15cm) diameter and tapers down to a 3.9 in (10cm) diameter at the bottom. 0.4 mm aperture mesh.

 

Kegland Part Number: KL04688
Adding to cart… The item has been added

The Gen 2 DigiBoil features two distinct updates that are not currently pictured in the primary images. The stainless steel lid has been upgraded to a glass lid, allowing you to observe and monitor boil activity. The rubber feet have been replaced with a plastic base that provides improved stability and slightly raises the unit for better ground clearance. 

The DigiBoil is a versatile electric kettle that can be used as a standalone unit or integrated into your current brew system to serve a variety of functions. Easily brew 5-gallon extract batches. Use it to preheat your strike water or sparge water to a precise temperature. Pair it with a pump and heat exchanger to use it for HERMS brewing. Or slap on a still top lid and condenser for distilling! With so many ways to use the DigiBoil, and an affordable price tag to boot, it's hard not to get excited about this electric kettle!

Interested in using the DigiBoil for all-grain brewing? With the Mash Upgrade Kit, you can easily convert the DigiBoil into an electric mash tun!

This DigiBoil model has two built-in heating elements that run off a 110V plug. One element is 1000w and the other is 500w for a combined 1500 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage both elements to quickly go from steeping temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s). 

Integrated stainless ball valve comes with a 13mm barb (approx. 1/2"). The barb can be removed to attach 1/2" FPT fittings if desired.

Features:

  • 304 stainless steel construction
  • 9 gallon total capacity
  • Digital temperature control
  • 110V / 15A power and plug (5 ft. cord)
  • Dual heating element control (1000w and 500w)
  • Heating elements are concealed for easy cleaning
  • 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2")
  • Stamped-in volume markers (gallons & liters)
  • Stainless lid
  • Temperature reads in °F or °C
    • With elements turned off, hold both +/- buttons to switch between °F or °C
  • Compatible with reflux and pot still (DS130 & DS120)*
  • External Dimensions: 29" H x 15" W (including handles)
  • Internal Dimensions: 19.5" H x 11.75" W
  • ETL Listed

*Distilling: to use the DigiBoil with a distilling condenser, you will need to purchase the still top lid and gasket (DS124).

Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States.  It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. Brewmaster is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA).

KegLand Part Number: KL07245

California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov