To upgrade your brew system, and make your life easier, thread these QD’s on your kettle, mash-tun, pump and chiller! When used with the male QD, they seal up very well in either flow direction. They will save you time and prevent messes. Just get several silicone hoses of various lengths and put barbed male fittings on either end. Then use them wherever you need to in your system! They are so much easier to use than pushing and pulling the hoses off of barbs. It makes things interchangeable for cleaning, and provides quick installation and removal.
MoreBeer! designed the original stainless QD's for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why MoreBeer! Stainless QD fittings have a near unanimous 5 star review.
Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects.
This will work with any of our H503 and H507 series of quick disconnects. These feature a 1/2" Female National Pipe Thread on the end for easy connectivity to almost anything. The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60 psi or less. 1/2" ID. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off.
