The KOMOS Kegerator features upgraded components for faster chilling and more efficient operation. It also has a redesigned interior that fits up to four 5-gallon kegs at one time. This unit represents an amazing value in home draft dispensing. It features a digital controller, stainless steel door, stainless steel floor, rolling casters, robust KOMOS CO2 regulator, and more. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 2-3" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter.
The most eye-catching difference between this unit and the previous model is definitely the capacity. This is the first kegerator we have offered that can fit up to four 5-gallon homebrew kegs at one time, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. The KOMOS kegerator positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs.
Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE133) as a quick connect option for your gas lines.
Improvements to the condenser, evaporator, and insulation means the KOMOS kegerator is more efficient than ever before. It also features a redesigned internal fan for improved air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines.
One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China.
Feature Summary:
- Digital Thermostat with wide 26 - 82° F temp range.
- Robust MKIII CO2 Regulator included
- Pre cut hole on top perfectly sized for 3" diameter tower
- CO2 Tank holder mounts on back of kegerator (tank not included)
- Efficient and powerful compressor
- Stainless Steel Door
- Drip Tray is removable for easy cleaning
- Stainless Steel Floor for additional keg support
- Removable shelf if you want to use it as refrigerator
- Rolling casters
- You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny
- Available Kegerator covers and "off road" casters for moving over uneven terrain.
Specifications:
- 23.75" wide
- 25" deep
- 31.5" with CO2 mount
- 32.5" Tall
- 35" with Caster wheels
- 110 v - 60 hz
- 0.8 Amp draw
- Optimal ambient temperature is 65°F – 80°F
- CSA Certified
Internal Dimensions:
- 19.5" wide
- 17" deep
- 16" down the center where compressor sits
- 28.5" tall
What Fits:
- 5 Gal. Torpedo Keg - 3
- 5 Gal. Slimline Torpedo Keg - 4
- 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3
- 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4
- 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3
- 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1
- 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1
- 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1
